Upswung Semi-Automatic Steel Bollards
Designed to go up and down under its on power. Excellent for vehicle access control in security installations-Locks automatically.
Why use Stainless Steel? It has many advantages over painted bollards. Stainless Steel doesn’t less likely to rust in the worse of environments. They never need to be repainted like painted units and graffiti is easily removed with cleaning products.
Why Semi-Automatic? they are the easiest bollards to install and very reliable. No In-ground connections are required which results in large installation savings. Can be operated at the bollard with a simple key removable key.
Upswung SA168/900SS Semi–Automatic Bollards
This type of concealed unit should be used when access is limited, or combined with automatic and/ or fixed. It solves transit and parking problems, at a reasonable cost, without the need for costly electrical service.
Thanks to the single-effect gas actuator, bollards are lifted automatically with a key, whereas lowering is achieved by slight foot pressure on the head of the concealed bollard.
Optional High Intensity LED Lighting and Reflective Tape
Vandal resistant Hardware in Graffiti-Proof Stainless Steel
Simple removable locking key operation
Specifications:
UPS-SA168/900SS
Actuator Cylinder, Material is Stainless Steel, Diameter 168mm/6.6″, Height is 900mm/35.4″, Wall Thickness 7/32″, Finish is Polished Stainless Steel, Reflective Tape 5cm, Optional with LED lights Optional
UPS-SA220/900SS
Actuator Cylinder, Material is Stainless Steel, Diameter 220mm/8.6″, Height is 900mm/35.4″, Wall Thickness 7/32″, Finish is Polished Stainless Steel, Reflective Tape 5cm, Optional with LED lights Optional