Upswung Removable In-Ground Stainless Steel Bollards
Excellent for access control security installations.
Stainless Steel
Stainless Steel have many advantages over painted units. Stainless Steel is more resistant to corrosion than carbon steel in the worse of environments. They never need to be repainted like painted units and graffiti is easily removed with cleaning products.
Removable Bollards
Removable Bollards are easy to install. No in ground connections are required which results in large installation savings.
The bollard is released with a key tool. The bollard once removed is carried away and a cover cap is locked in place to cover the hole.
Upswung UPS- R114/900SS and UPS-168 /900SS Removable Bollard
This Removable traffic unit is suitable for mixed installations while maintaining the same architectural design as our other units.
They can be removed and a cover plate (pictured below) covers the hole to remove the tripping hazard. It requires only minor excavation to set the pocket assembly. It can be used when accesses are limited, or combined with automatic/ semi-automatic versions. It solves transit and/or parking problems, at a reasonable cost, without the need for electrical energy.
Recessed Pull handle
in its operating position
In-ground portion with
removable locking key
Cover Cap for when
Bollard is removed
Specifications:
UPS-R114/900
Removable Bollard, Material is Stainless Steel, Diameter 114mm ( 4.5″), Height is 900mm/35.4″, Wall Thickness 1/8″, Surface Treatment is Polished Stainless Steel, Reflective Tape 5cm, Reflective Tape is Optional.
UPS-R168/900SS
Removable Bollard, Material is Stainless Steel, Diameter 168mm ( 6.6″), Height is 900mm/35.4″, Wall Thickness 7/32″, Surface Treatment is Polished Stainless Steel, Reflective Tape 5cm, Reflective Tape is Optional.